Many residential aged care homes still run a hardwired nurse call system that was installed decades ago. It keeps working until a part fails and nobody can supply a replacement. At that point the question is no longer whether to replace it, but how quickly, how disruptively and at what cost.
These are the questions providers ask us most often when they are weighing up a replacement, and how we answer them.
When is it time to replace a hardwired nurse call system?
The clearest sign is support. When replacement parts and system support can no longer be sourced, every fault becomes a risk to residents and a problem for the home’s compliance. Earlier signs are staff working around call points they no longer trust, reporting that cannot show who responded and how quickly, and a system that cannot take on the sensing and monitoring that care plans now call for.
Do you have to rewire the building to upgrade?
Not with a wireless system. In eeviCare, the wall plates, pendants and sensors connect wirelessly to the eevi Gateway, which links them to carers’ apps and the cloud-based Care Portal. That is what makes it possible to install into an existing, occupied building rather than retrofitting a proprietary wired network.
How long does a changeover take, and can residents stay in place?
A move from wired to wireless is usually a two to three month process, from receiving the building plans to an installed and commissioned system.
- Month one: design review. We work through the plans with you, including site visits. The output is a fully costed package of works that supports a firm fixed quote.
- Month two: procurement and resource planning.
- Month three: onboarding, configuration, installation, commissioning and staff training.
Most of that time is planning. The installation itself is short, and it is designed to happen within the existing facility. Clifton Community Health Services, below, had eeviCare up and running within a few weeks, and its team described the install as happening without unnecessary disruption.
What does it cost: upfront capital or a monthly subscription?
There are two parts, and both are straightforward.
The installation. The design review produces a bill of materials and installation recommendations, which supports a firm fixed quote to deliver a fully commissioned wireless nurse call system. That quote typically includes an allowance for sensors, such as bed sensors in around 30 per cent of rooms, so traditional nurse call workflows are enhanced with monitoring data from day one. Even with that added sensing, an eeviCare installation is typically 20 to 30 per cent more affordable than a traditional hardwired system. Optional overlays such as fall detection and real-time location can be included upfront or, more often, added later.
The ongoing services. Ongoing costs depend on the services the provider subscribes to, and those are personalised for each resident. One resident may only need a pendant to call for help, while their neighbour needs sleep monitoring, behavioural monitoring and fall detection. eeviCare only charges for the services residents need, and the Care Portal lets staff switch services on and off as care needs and care plans change.
That flexibility is the real difference from an old hardwired, proprietary system: the system scales with the residents, rather than the residents working around the system.
Which standard should the new system meet?
AS 3811:2026, published in June 2026, replaced a standard that had stood since 1998. Even the title has changed, from “Hard-wired patient alarm systems” to “Hard-wired consumer communication and alarm systems for use in healthcare facilities”, and its scope now names residential aged care facilities alongside hospitals and mental health units. Any replacement you buy today should be assessed against it. We explain what changed in The standard finally caught up: what AS 3811:2026 means for nurse call.
eevi’s wall plates are designed to AS 3811, and eeviCare is built to meet the standards for both nurse call in aged care (AS 3811) and personal emergency in retirement living (AS 4607). For providers who run a village alongside a residential home, that means one platform across both.
A provider who has made the switch: Clifton
Clifton Community Health Services is a recent example where wireless was the only affordable way to replace a failing hardwired system. Clifton is a community-owned and operated regional provider and, like most regional facilities, runs on a tight budget. When its existing hardwired system could no longer be supported, and replacement parts and system support were impossible to get, Clifton’s board chose eeviCare as the replacement. We installed the system and had it up and running within a few weeks, at a fraction of the cost of retrofitting a traditional system.
“EeviCare has been great for Clifton Community Health Services. As a small rural provider, we needed a system that could be installed within our existing facilities without creating unnecessary disruption, while giving our staff better visibility and oversight. The wireless system has worked well, the reporting is a significant improvement on what we had previously, and we have been able to add features such as bed sensing and fall detection where needed. Just as importantly, the Eevi team has always been approachable, responsive and willing to work through issues with us. I would highly recommend EeviCare to other rural aged care providers.”
Aaron, Director of Operations, Clifton Community Health Services
Thinking about replacing your nurse call system?
If your hardwired system is getting harder to support, the first step is a design review of your plans. It gives you a fixed price and a realistic timeline before you commit to anything. Book a call with our team.
eeviCare is modular, cloud-based and purpose-built for the continuum of care, not adapted from a hospital system. It is Australian-owned, trusted today by more than 100 communities and monitoring over 10,000 lives across Australia. Visit eevi.life or call 1300 802 738.
Quick answers
Typically two to three months from receiving the building plans to a commissioned system: one month of design review, one month of procurement and resource planning, and one month of installation, commissioning and staff training.
A wireless system like eeviCare is designed to go into an existing building. Wall plates, pendants and sensors connect wirelessly to the eevi Gateway, which links them to carers and the cloud-based Care Portal.
In our experience an eeviCare installation is typically 20 to 30 per cent more affordable than a traditional hardwired system, even with bed sensors included in around 30 per cent of rooms. The installation is delivered against a firm fixed quote.
Ongoing costs depend on the services each resident needs. Services are switched on and off in the Care Portal as care plans change, so providers only pay for what residents actually use.
AS 3811:2026, Hard-wired consumer communication and alarm systems for use in healthcare facilities. Its scope names residential aged care facilities alongside hospitals and mental health units. For independent living, the relevant standard is AS 4607 for personal response systems.